WIRELESS PLUG-IN CAR HARDSFREE HF-33W - Hands-free kit NOKIA - Free user manual and instructions

Product Type	Bluetooth Car Handsfree Kit
Power Supply	12 V via cigarette lighter socket
Wireless Connectivity	Bluetooth 1.2, Handsfree Profile 1.5
Bluetooth Range	Up to 10 meters
Pairing Code	0000
Main Functions	Handsfree calls, volume adjustment, last number redial, voice command (depending on phone)
Call Button	Answer, reject, transfer call
LED Indicator	Blue (connection), green (call in progress)
Installation	Plugs into cigarette lighter socket, tiltable up to 100 degrees
Care and Cleaning	Keep dry, avoid dust and heat, do not use harsh chemicals
Safety	Compliant with directives 1999/5/EC and 2004/104/EC; do not obstruct airbag deployment
Spare Parts and Repairability	No detachable parts; contact an authorized service center in case of failure
Warranty	See applicable legal terms
Compatibility	Bluetooth-compatible phones supporting handsfree profile
Brand and Model	Nokia HF-33W

Frequently Asked Questions - WIRELESS PLUG-IN CAR HARDSFREE HF-33W NOKIA

How do I pair the Nokia HF-33W handsfree kit with my phone?

Make sure the kit is plugged into the cigarette lighter and your phone's Bluetooth is on. Search for Bluetooth devices, select the HF-33W from the list and enter the code 0000. The kit will beep and the blue LED will light up when the connection is established.

The kit does not turn on, what should I do?

Check that the cigarette lighter socket provides power (some vehicles cut power after turning off the ignition). Try another socket if available. If the problem persists, the kit may be defective.

Can I use the kit with a non-Nokia phone?

Yes, the kit is compatible with any phone that supports the Bluetooth handsfree profile, regardless of brand, as long as it is Bluetooth 1.2 or higher compatible.

How do I adjust the call volume?

Use the Volume + and Volume - buttons on the kit during a call.

The kit disconnects during a call, what should I do?

Make sure the phone and kit are within 10 meters of each other and that no obstacles interfere. Also check that the phone's battery is sufficiently charged. Reset the connection by unplugging and replugging the kit.

Can I charge my phone via the handsfree kit?

No, the Nokia HF-33W kit does not have a phone charging port. It is intended solely for handsfree calls.

How do I transfer a call from the kit to the phone and vice versa?

Press and hold the call button (center button) during an active call to switch audio between the kit and the phone.

What if the kit emits a continuous beep or does not connect?

This may indicate a pairing issue. Remove the kit from your phone's Bluetooth device list, then re-pair it following the initial procedure.

The LED does not light up, is this normal?

The LED lights up blue when the kit is plugged in and connected. If it remains off, check the power supply of the cigarette lighter socket. If the LED flashes, it may indicate a connection search.

How do I clean the handsfree kit?

Unplug the kit and wipe it with a soft, dry cloth. Never use chemicals, solvents, or abrasive cleaners that could damage the device.

USER MANUAL WIRELESS PLUG-IN CAR HARDSFREE HF-33W NOKIA

Nokia Wireless Plug-in Car Handsfree HF-33W

Diagram of a device with numbered parts labeled 1 through 7, likely for labeling or assembly instructions.

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this HF-33W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9.

A copy of the Declaration of Conformity can be found at: http://www.nokia.com/phones/declaration_of_conformity/.

CE0560

The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste.

© 2006 Nokia. All rights reserved.

Reproduction, transfer, distribution or storage of part or all of the contents in this

document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Bluetooth is a registered trademark of Bluetooth SIG, Inc.

Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves

the right to revise this document or withdraw it at any time without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your

first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect performance.

Introduction

The Nokia Wireless Plug-in Car Handsfree HF-33W allows you to

make and receive hands-free calls in your car. You can connect the

handsfree to a compatible phone that supports Bluetooth wireless technology.

Read this user guide carefully before using the handsfree. Also read the user guide for your phone, which provides important safety and maintenance information. Keep the handsfree out of reach of small children.

Bluetooth wireless technology

Bluetooth wireless technology allows you to connect compatible devices without cables. In a Bluetooth connection, the phone and the

Get started

handsfree should be within 10 meters (30 feet) of each other. Connections can be subject to interference from obstructions, such as other electronic devices.

The handsfree is compliant with the Bluetooth Specification 1.2 supporting the Handsfree Profile 1.5. Check with the manufacturers of other devices to determine their compatibility with this device.

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Before using the handsfree, you must install it in the car, and pair it with a compatible phone.

The handsfree contains the following parts shown at the start of this guide:

tiltable cigarette lighter plug (1), microphone (2), indicator light (3), volume up key (4), volume down key (5), call key (6), and speaker (7).

Install the handsfree

To function properly, the handsfree must be connected to the cigarette lighter socket of the car, and power must be supplied by the 12-volt car battery.

Insert the handsfree into the cigarette lighter socket. The cigarette lighter plug is provided with a removable cap. If the plug does not fit in the socket, remove the cap by sliding it from the plug. You can tilt the cigarette lighter plug to the desired angle (up to 100 degrees). Do not try to force the plug to tilt more.

Ensure that the handsfree is properly inserted in the cigarette lighter socket, and does not interfere with the normal operation of the car.

In some car models, the cigarette lighter socket is powered by the car battery even when you remove the ignition key. In those cases, the car battery might be discharged even if the handsfree is not used. Contact the vehicle manufacturer for more information.

Switch on or off

To switch on, plug the handsfree into the cigarette lighter socket. The indicator light turns on.

To switch off, pull the handsfree out from the cigarette lighter socket.

Pair the handsfree

1. Switch on your phone.
2. Ensure that the handsfree is plugged properly into the cigarette lighter socket.
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.

4. Select the handsfree from the list of found devices.

5. Enter the Bluetooth passcode 0000 to pair and connect the handsfree to your phone. In some phones you may need to make the connection separately after pairing.

If the pairing is successful, the handsfree sounds a beep and appears in the phone menu where you can view the currently paired Bluetooth devices. When the handsfree is connected with your phone, the blue indicator light is displayed.

You can set your phone to connect with the handsfree automatically when the handsfree is switched on. To do this in Nokia phones, change your

paired device settings in the Bluetooth menu.

To disconnect the handsfree from your phone, pull the handsfree out from the cigarette lighter socket, or disconnect the handsfree in the Bluetooth menu of the phone.

To reconnect the paired handsfree to your phone, plug the handsfree into the cigarette lighter socket.

To pair and connect the handsfree with a new phone, first disconnect the handsfree in the Bluetooth menu of the currently connected phone, and then pair and connect the new phone.

Call handling

To adjust the volume during a call, use the volume keys on the handsfree.

To make a call, use your phone in the normal way when the handsfree is connected to your phone. Speak

toward the handsfree microphone. For optimal performance, check that there are no objects in front of the microphone and that the microphone is in front of the user, not beneath or behind. The green indicator light is displayed during a call.

If your phone supports last number redial with the handsfree, press the call key twice when no call is in progress.

If your phone supports voice dialing with the handsfree, press and hold the call key when no call is in progress,

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.

and proceed as described in the user guide of your phone.

When you receive a call, you hear a ringing tone through the handsfree speaker and the green indicator light flashes. To answer the call, press the call key, or use the phone keys. To reject the call, press the call key twice. To transfer the active call between the handsfree and your phone, press and hold the call key.

To end a call, press the call key, or use the phone keys.

• Keep all accessories and enhancements out of the reach of small children.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your

device does get wet, allow it to dry completely.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts, microphone, or speaker, and prevent proper operation.

If the device is not working properly, take it to the nearest authorized service facility for service.

Additional safety information

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such

as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more

information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.

Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.